高云飞, 牛洁楠. 服从分数阶Zener模型黏弹性体的力学特性研究[J]. 信阳师范学院学报(自然科学版), 2019, 32(2): 191-195. DOI: 10.3969/j.issn.1003-0972.2019.02.004
引用本文: 高云飞, 牛洁楠. 服从分数阶Zener模型黏弹性体的力学特性研究[J]. 信阳师范学院学报(自然科学版), 2019, 32(2): 191-195. DOI: 10.3969/j.issn.1003-0972.2019.02.004
GAO Yunfei, NIU Jienan. Study on Mechanical Properties of Viscoelastic Body Subjected to Fractional Zener Model[J]. Journal of Xinyang Normal University (Natural Science Edition), 2019, 32(2): 191-195. DOI: 10.3969/j.issn.1003-0972.2019.02.004
Citation: GAO Yunfei, NIU Jienan. Study on Mechanical Properties of Viscoelastic Body Subjected to Fractional Zener Model[J]. Journal of Xinyang Normal University (Natural Science Edition), 2019, 32(2): 191-195. DOI: 10.3969/j.issn.1003-0972.2019.02.004

服从分数阶Zener模型黏弹性体的力学特性研究

Study on Mechanical Properties of Viscoelastic Body Subjected to Fractional Zener Model

  • 摘要: 基于黏弹性理论和分数阶导数理论,建立了分数阶Zener模型并给出其本构方程形式,在此基础上推导出服从分数阶Zener模型黏弹性体的松弛函数、蠕变函数及复模量、损耗比等力学性能参数的表达式.通过数值算例,分析了材料的蠕变和松弛行为以及部分力学参数随频率的变化规律.结果表明:服从该模型的黏弹性材料的蠕变和松弛特性,可以通过改变分数阶Zener模型的分数阶数值来控制.在低频时,黏弹性材料的存储模量趋于1,此时材料处于一种橡胶态,其性质接近弹性体.而在高频时,分数微分算子的值越大,耗散率越快趋于稳定;损耗比在低频时加速上升,随着频率增大,在达到最大值后开始有下降趋势.

     

    Abstract: Based on the viscoelastic theories and the theories of fractional derivatives,the fractional Zener model and its constitutive equations are established.After that,its parameters of mechanical properties are derived based on the above model,such as the creep function,relaxation function,complex modulus and its loss ratio of viscoelastic bodies obeying fractional Zener model.Finally,its behavior of creep and relaxation,including its variation of partial parameter with frequency,is analyzed through a numerical example.The results show that:The creep and relaxation of viscoelastic materials can be well described by the fractional Zener model.The materials storage modulus will approach to one and the loss ratio change quickly when the frequency is small,approaching to a rubbery state,closing to the elastomer.However,when the frequency is high,the rate of dissipation tends to be stable quickly and when the frequency increases,the loss ratio begins to drop until reaching its maximum value.

     

/

返回文章
返回