李延升, 张保林, 杨朋, 张建立. 固体溶解过程的元胞自动机模拟[J]. 信阳师范学院学报(自然科学版), 2010, 23(4): 590-594.
引用本文: 李延升, 张保林, 杨朋, 张建立. 固体溶解过程的元胞自动机模拟[J]. 信阳师范学院学报(自然科学版), 2010, 23(4): 590-594.
LI Yan-sheng, ZHANG Bao-lin, ZHANG Bao-lin, ZHANG Jian-li. The Simulation of Solid Dissolution with Cellular Automata[J]. Journal of Xinyang Normal University (Natural Science Edition), 2010, 23(4): 590-594.
Citation: LI Yan-sheng, ZHANG Bao-lin, ZHANG Bao-lin, ZHANG Jian-li. The Simulation of Solid Dissolution with Cellular Automata[J]. Journal of Xinyang Normal University (Natural Science Edition), 2010, 23(4): 590-594.

固体溶解过程的元胞自动机模拟

The Simulation of Solid Dissolution with Cellular Automata

  • 摘要: 采用4邻居条件,以服从二次分布定理的演化概率作为演化规则,以matlab作为编程软件,用元胞自动机模拟固体在液体中溶解的过程.研究结果表明:溶解的前期,溶解速率大致上恒定,后期逐渐减小;溶解过程中固体的形状基本上保持不变,只是体积缩小,直到溶解的最后阶段.同时用微积分的方法进行了分析,得到了相同到的结论.以硫酸铜晶体在水中的溶解实验为实例,验证了元胞自动机模拟的正确性.

     

    Abstract: Based on four neighbor condition and the envolvement rules that obey the two items distribution theorem,and taking matlab as program software,the solution processes of solid in liquid were simulated with cellular automa.The results showed that the dissolution rate was nearly constant at the prophase and decrease gradually at anaphase,and the shape of the solid remained unchanged and the volume was reduced until the dissolve process got to the ultimate period.Meanwhile the solution process was an...

     

/

返回文章
返回